Description

The Titan Post Anchor™ is the most versatile user friendly, engineered post anchor available. Quickly and easily install wood posts without ugly bulky metal brackets wherever you wish onwhatever surface you want!

Use with 100x100 wood posts on wood or composite decks, stairs, patios, concrete or any other hard surfaces*.

Guard rails, support posts, gazebos or pergolas.
Composite post sleeves/skirts fit right over
Fence posts on concrete

You're going to love it.

No notching decking
No complicated carpentry, framing or hardware
Posts are higher and drier for longer life

Amaze yourself. Build like a Pro!

*The 1/4" deck screws provided are for wood or composite surfaces, not concrete. Please use suitable concrete screws, sold separately.

Technical Specifications
Model	TIST441
Color/Coating	316 stainless base, 304 stainless tube
Material	Formed/Welded sheet steel
Post Size	3.5” to 4” (89mm to 100mm). NOTE: These anchors are suitable for 100mm x 100mm NOMINAL posts, or ~90mm x 90mm actual posts. Posts that are oversized must be planed down to suit or notched at the base to allow deck anchoring.
Dimensions	Base: 16mm H x 128mm W x128mm L Tube: 89mm H x 32mm dia Inner holes: 10mm dia, 50mm o.c. Outer holes: 7mm dia, 51mm o.c.
Weight	1.07 kg
Fasteners	For residential engineering guidelines use (4) 3/8”x5 hex head lag screws, minimum (6) #14x3 or 1/4x3” deck screws or hex head lag screws. Includes: (4) 3/8"x5" lag screws, (8) #14x3" stainless screws (18-8)
Recommended Uses	Residential deck railing 915mm-1077mm high, pergola or gazebo posts, support posts. See Engineering Reports for horizontal, compression and tension loads. Maximum psacing between posts 1.8m.
Composite Decking	Works with composite post sleeves and post base skirts.
Recommended Wood Species	For best performance and ease of installation use with species ranging from cedar, spruce, redwood, pine, hem-fir with moisture content (m.c.) of 12%-20%. To comply with residential engineering guidelines, do not use any species with specific gravity (density) less than the lowest of the above recommended species.
Other Species	Douglas fir – ensure cutting edge of tube is sharp and m.c. not less than 12%. Otherwise, install as if hardwood.
Hardwoods	Requires hole saw and forstner bit installation technique as tube can not be impaled into wood easily. See How To Guide.
Pre-Drilling	For best performance it is recommended to pre-drill lag screw holes. See How To Guide.
Concrete Surfaces	Use minimum of 4 concrete ¼” screws at least 2-1/4” long. Sold separately.
Install Instructions	A copy of the installation instructions can be found here.